How Does Digital Pre-Distortion Achieve Closer Power Amplifier Saturation to for Better Linearity?
Getting maximum power from your SSPA without creating signal distortion is a constant challenge. This trade-off between power and linearity often forces unwanted compromises in system design and efficiency. The best way to optimize an SSPA is by using Digital Pre-Distortion (DPD).1 DPD digitally models the amplifier’s non-linear behavior, including memory effects2, and creates an […]
How to Accurately Determine RF Power Amplifier Drain Efficiency with Power Back-off?
You trust the datasheet for amplifier efficiency. But your real-world SSPA design overheats and performs poorly. I will show you how to measure the real efficiency and avoid these problems. To accurately determine RF power amplifier efficiency, you must go beyond the datasheet. Use a high-precision digital multimeter and a calibrated power meter. De-embed your […]
Why GaN SSPA Ruin Your High Linearity: Taming Trapping Effects via DPD and Power Back-off
Choosing between GaN and GaAs SSPAs is tricky. GaN’s smaller size is appealing, but its non-linearity can secretly tank your system performance1. Let’s find the right solution. Choose GaN for higher power density and a smaller footprint, but be prepared for its non-linearity. To maintain signal integrity, you must implement Digital Pre-Distortion (DPD) and a […]
Catalan 
English 
Spanish (Spain) 
Arabic 
French (France) 
Vietnamese 
Indonesian 
Belarusian 
Moroccan Arabic 
Tibetan 
Danish 
Bulgarian 
Bosnian 
Frisian 
Japanese 
Bashkir 
Cebuano 
French (Belgium) 
Estonian 
Hindi 
Kurdish 
Tahitian 
Spanish (Colombia) 
Croatian 
Breton 
Georgian