All Posts

Feeling overwhelmed by spurious signals in your RF designs? You’re not alone. The unpredictable nature of spurs can ruin performance and cause major headaches for

Poor isolation in your up/downconverter can ruin your system’s performance. This leads to self-jamming and unreliable links1. But a systematic approach can help you achieve

Ever wondered how massive amounts of satellite data reach us clearly? It’s not as simple as pointing a dish, as signal loss and distortion are

You have an LNB, and it has a small antenna inside. So why do you still need that big satellite dish? The two must work

Using a power amp as a preamp seems logical but can cripple your system. This choice will drown weak signals in noise, making them impossible

Designing a multiband SSPA with a perfectly flat gain curve feels like an impossible task. The physics just seems to be working against you. But

Getting maximum power from your SSPA without creating signal distortion is a constant challenge. This trade-off between power and linearity often forces unwanted compromises in

You trust the datasheet for amplifier efficiency. But your real-world SSPA design overheats and performs poorly. I will show you how to measure the real

Choosing between GaN and GaAs SSPAs is tricky. GaN’s smaller size is appealing, but its non-linearity can secretly tank your system performance1. Let’s find the

Choosing the right power amplifier is a critical decision. You need raw power, but a distorted signal can ruin your entire system. The right choice